Experience
Jacobs Engineering   January 2013 - Present
Performance Associates International, Inc.   1993 - 2013

Skills
Mining, Gold, Project Management, Continuous Improvement, Engineering, Metallurgy, Commissioning, Project Engineering, Process Engineering, Steel, Engineering Management, Materials, Factory, EPC, Process Simulation, Mineral Processing, Minerals

Education
New Mexico Institute of Mining and Technology   1979 — 1981
Master's degree, Metallurgy

New Mexico Institute of Mining and Technology   1973 — 1979
Bachelor of Science (BS), Metallurgical and Materials Engineering

Experience
HNTB  July 2008 - Present
Jacobs Engineering   December 2006 - July 2008
TEC Engineering  December 2004 - December 2006
Ohio Department of Transportation  June 2004 - December 2004

Skills
Traffic Engineering, Transportation, Pavement Engineering, Coordination, Leadership, Transportation..., Civil Engineering, Highways, Road Traffic, Transportation Planning, Traffic Management, Road, Traffic Simulation, VISSIM, Microstation, Feasibility Studies, AutoCAD, Traffic Signal Design, Construction, Highway Design, Road Safety, Bridge, Synchro, MicroStation

Education
University of Cincinnati   2002 — 2004
MS, Transportation Engineering & Planning

National Institute of Technology Tiruchirappalli   1997 — 2001
BE, Civil Engineering

Little Flower High School, Sarni   1990 — 1995
Elementrary and Middle School

Experience
Jacobs Engineering   2006 - Present
GreenbergFarrow  1996 - 2006
The RBA Group  June 1993 - April 1996
Chapman and Biber   1989 - 1993
Rampulla Associates Architects  1988 - 1989
Mojo Stumer Architects  1984 - 1988

Skills
LEED AP, Submittals, Construction Management, Sustainable Design, Construction, Design Research, LEED, Revit, Mixed-use, AutoCAD, Feasibility Studies, Space-planning, Comprehensive Planning, Architecture, Construction Drawings

Education
New York Institute of Technology   1981 — 1985
BS, Architecture

Tottenville, HS Staten Island, NY

Experience
Aspen Aerogels  September 2015 - Present
Honeywell Aerospace  April 2014 - March 2015
Jacobs Engineering   December 2013 - March 2014
Jacobs Engineering (Contract Assignment)   March 2013 - June 2013
Sunoco Chemicals  June 2010 - October 2012
Abbott  February 2008 - November 2009
Various Contract Positions  October 2005 - August 2007
Wyeth Pharmaceutical  July 2004 - June 2005
Novartis  August 2003 - March 2004
Dow Chemical  November 2001 - August 2003

Skills
DCS, SCADA, Engineering, Leadership - People, Leadership - Technology, Process Control..., Distributed Control..., Programmable Logic..., PI Data Historian, Human Machine Interface, Control System..., Unit Support, DCS Troubleshooting, Control System Backup..., Disaster Recovery, Commissioning, Control System SAT, OPC, Process Safety..., Quadlog SIS, Triconex SIS, Commander - M1 Tank..., Commander - Mechanized..., Boilers, PLC, Factory, Process Automation, Triconex, Automation, Programming, Control Logic, Allen Bradley, Process Optimization, Steam, iFix, Process Control, P&ID, Wonderware, HAZOP, Process Engineering, GAMP, Teamwork, Process Safety, Project Engineering, DeviceNet, GMP, Instrumentation, Control Systems Design, Process Simulation, SIS

Education
New Jersey Institute of Technology   1980 — 1986
Bachelor's Degree, Chemical Engineering, 3.04

DCS Courses

Franklin High School

PLC Courses

SIS/S84 Courses

Experience
The Crittenden Press   January 2013 - Present
Auto Dealer Monthly   June 2012 - December 2012
Breeze Newspapers  2006 - 2007
Kentucky New Era  2002 - 2004
Jacobs Engineering   1997 - 1999

Skills
Newspapers, Journalism, News Writing, AP Style, Copy Editing, Feature Articles, Breaking News, Editorial, Fact-checking, Publications, Investigative Reporting

Education
Murray State University
Bachelor's Degree, Journalism, cum laude

Paducah Community College   1992 — 1996
Associate's Degree, Business

Experience
FEMA  December 2011 - Present
Tishman Construction Corp  May 2005 - April 2011
Jacobs Engineering   1985 - 2005

Skills
Construction Management..., Program Management, Design Phase Management, Architectural Program..., Schedule Development, Process Development, Claims Review & Data..., Technical & Narrative..., Management of..., Team Building, Business Development, Performance Assessment, Formal Presentations, Acting, Voice Over, Videography, Photography, Music Production, Creative Writing, Report Writing, Proposal Writing, Film Acting

Education
New York Institute of Technology
BS, Architecture

Experience
PowerServices, Inc.   September 2014 - Present
Jacobs Engineering   July 2004 - September 2014
RMF Engineering  August 2002 - June 2004
Vaughan Electric   June 2000 - August 2002

Skills
Electrical Engineering, Electrical, Construction, Construction Management, Power Distribution, Substation Design, Healthcare, Data Centers, Arc Flash Studies, Utility Coordination, Relaying and SCADA, Power Plants, Arc Flash, Electrical Design, Gas Turbines, Substation, Smart Grid, Engineering, Energy, AutoCAD, Commissioning, Electricians, Project Engineering, Project Planning, Energy Audits, Project Management, Renewable Energy

Education
North Carolina State University   1999 — 2003
BS, Electrical Engineering

Northern Durham High School   1995 — 1999
High School Diploma

Experience
Jacobs Engineering   May 2003 - Present
Jacobs  2003 - Present
Process Facilities Incorporated   January 2000 - May 2003
Sharp Design  July 1997 - December 1999
Life Sciences International  February 1989 - July 1997
Amicon - W.R. Grace Company   1986 - 1989
Amicon Div. of WR Grace   1986 - 1989
Waterscience   1983 - 1985
Ebasco  July 1980 - 1983

Skills
Engineering, Piping, Process Engineering, Contract Management, Validation, Purchasing, Energy, Project Engineering, Biotechnology, Pumps, Procurement, Project Planning, P&ID, Commissioning, Petrochemical, Electricians, Instrumentation, HAZOP, Refinery, AutoCAD, EPC, Quality System, Chromatography, Pharmaceutical Industry, Root Cause Analysis, Nuclear, Process Simulation, Project Control, Engineering Management, Testing, Mechanical Engineering, HVAC, Chemical Engineering, Process Control, MS Project, Aseptic Processing, Engineering Design, FEED, Power Generation, Primavera P6, DCS, Quality Management, Power Plants, Factory, Plant Design, Inspection, PDMS, Heat Exchangers

Education
New Jersey Institute of Technology   1978 — 1980
Bachelor of Science (BS), Mechanical Engineering

Experience
Jacobs Engineering   April 2004 - Present
Foster Wheeler  April 1991 - January 2003
Lurgi Corp. /Combustion Engineering   May 1980 - April 1991

Skills
FEED, Piping, Refinery, Petrochemical, EPC, Microstation, Project Engineering, P&ID, Engineering Design, Refineries, AutoCAD, Project Execution, Detail Design

Education
Fairliegh Dickinson   1968 — 1972
B.S., Business/Managerial Economics

NJIT
Non-Matriculated Engineering Courses such as stress analysis, Stuctures design; ACAD

Experience
GLOBALFOUNDRIES  January 2015 - Present
M+W Group  September 2012 - January 2015
GE Energy  October 2008 - September 2012
M+W Zander  May 2005 - October 2008
M+W Zander US Inc.   2005 - 2008
HLW International  January 2005 - May 2005
Jacobs Engineering   October 1999 - December 2004
Kling Lindquist  January 1997 - October 1999
Harza Northeast   May 1993 - September 1996
Joseph T. Matthews & Associates   September 1989 - May 1993

Skills
Construction, Photovoltaics, Microstation, AutoCAD, CAD

Education
New York Institute of Technology-Old Westbury   1985 — 1993
Bachelor Science, Architectural Technology

Experience
GE Hitachi Nuclear Energy  September 2012 - Present
IBM  August 2010 - October 2012
Troxler Electronic Laboratories, Inc.   April 2010 - August 2010
UEC Electronics, LLC.   April 2009 - May 2010
MTS Systems  January 2001 - March 2009
Jacobs Engineering   June 2000 - January 2001

Skills
SMPS Circuit Design, Military Design, Analog Circuit Design, Embedded Systems, PCB design, Intrinsically Safe..., C++, Electronics, Circuit Design, Product Design, Automation, Control Systems Design, PLC, Electrical Design, Electricians, Electrical Engineering, Testing, Engineering, Manufacturing, Engineering Management, PCB Design, Instrumentation

Education
North Carolina State University
BSEE

Devry Institute of Technology
AS

Experience
Jacobs  February 2015 - Present
Elsberry Contractors   September 2014 - Present
CDM Smith  January 2014 - Present
CDM Smith  June 2013 - Present
Jacobs Engineering   October 2011 - June 2013
Parsons  April 2009 - October 2011
Parsons  September 2004 - April 2009
Parsons  March 2004 - September 2004
Parsons  November 2002 - March 2004
Kvaerner Metals  February 1995 - October 2002

Skills
Commissioning, Project Engineering, Petrochemical, FEED, Refinery, Piping, P&ID, Engineering, Project Control, Construction Management, Construction, HAZOP, Gas, EPC, Construction Safety, Inspection, LNG, Petroleum, Power Generation, Safety Management..., Electricians, DCS, Energy, Instrumentation, Facilities Management, Factory, Metal Fabrication, Water, Engineering Design, Nuclear, Completion, Maintenance Management, Pipelines, Project Estimation, Pumps, Boilers, Gas Turbines, Oil/Gas, CPM Scheduling, Supervisory Skills, Steel, EPCM, Onshore, ASME, Mining, FPSO, Process Control, Pressure Vessels, Plant Maintenance, Turbines

Education
New Mexico Institute of Mining and Technology   1983 — 1986
Bachelor of Science (BS) Petroleum Engineering, Production

The University of New Mexico   1971 — 1973

Experience
Kawasaki Tennessee, Inc.   January 2014 - Present
Environmental Standards   July 2011 - November 2013
JTEKT Automotive  January 2011 - July 2011
Microbac Laboratories  May 2007 - December 2010
Jewely Television   April 2005 - February 2007
Environmental Systems Corporation  October 2003 - April 2005
IT Solutions  February 2002 - October 2003
Jacobs Engineering   March 2001 - February 2002
Independent Contractor  November 2000 - March 2001
Eventbooking.com   May 2000 - November 2000

Skills
Environmental Awareness, Project Management, Environmental Consulting, VB.NET, ASP.NET, Traditional ASP, PHP, HTML, JavaScript, VBA (Excel, Access..., Visual Basic 6.0, SQL Server 2010, Oracle 9i, 10g, Microsoft Access (all..., MySQL, ARC-GIS 10.1, Basic graphics..., Databases, Microsoft SQL Server, Software Documentation, Quality Assurance, Visual Basic, Environmental Science

Education
University of Tennessee, Chattanooga   1986 — 1988
BS, Environmental Science

New Mexico Institute of Mining and Technology   1984 — 1986
Environmental Engineering

Experience
FMC Technologies  August 2014 - Present
John's Truck Service   September 2013 - August 2014
RES / Rawson Energy Solutions   September 2011 - October 2013
EEC / Warren Equipment   March 2010 - August 2011
Jacobs Engineering   June 2008 - November 2009
Century 21 Champions   January 2001 - January 2008
Home Furniture & Carpet Company   January 1993 - January 2001
General Electric Aircraft Engines  January 1990 - January 1993
General Electric Aircraft Engines  January 1988 - January 1990
Lockheed Martin  January 1987 - January 1988

Skills
Engineering, Manufacturing, Inspection, Continuous Improvement, Project Engineering, Quality Assurance, Management, Project Management, Electricians, Purchasing, Negotiation, Electrical Engineering, Oil & Gas

Education
NMSU   1983 — 1987
BS - MET, Manufacturing

New Mexico State University   1982 — 1987
Bachelor of Science, Mechanical Engineering Technology

Experience
Wolverton & Associates  July 2013 - Present
Jacobs Engineering   September 2006 - July 2013
Jordan, Jones & Goulding   September 2006 - February 2010
TSD Engineers   April 2006 - September 2006
Mosaica Education   July 2004 - September 2006

Skills
Marketing, Market Research, Community Outreach, Training, Marketing Communications, Marketing Strategy, Social Media, Event Planning, Newsletters, InDesign, Marketing Management, Public Speaking, Microsoft Word, Microsoft Excel, PowerPoint, Microsoft Office, CRM, Project Management, Project Planning, Management, Social Networking, Customer Service, Proposal Writing, Program Management, Public Relations, Strategy, Analysis, Editing, Time Management, Budgets

Education
Georgia State University - J. Mack Robinson College of Business   2007 — 2009
MBA, Marketing

New York University   2001 — 2004
BFA, Theatre

Experience
Oerlikon Metco previously Sulzer Metco   April 2012 - Present
Datability (A Division of Kruse Controls)   January 2010 - April 2012
Jacobs Engineering   August 2008 - July 2009
Keihin Carolina System Technology, INC   May 2007 - January 2008

Skills
Android, Java, Wonderware, PLC, Ladder Logic, Labview, Programming, iOS, iPhone development, Problem Solving, Controls, Engineering, OOP, Mobile Applications, Eclipse, Automation, Software Development, SQL, iOS development, Testing, C++, R&D, Embedded Systems, Internal Controls, Integration, Human Machine Interface, SCADA, Control Systems Design, Allen Bradley, Databases, Microsoft SQL Server

Education
North Carolina State University   2004 — 2008
BS, Computer Engineering

Experience
EBDAH Architecture LLC   June 2009 - Present
Jacobs Engineering   February 2008 - May 2009
SAB CAD INC   2007 - 2009
Longo Partners   September 2005 - February 2008
jarmel Kizel Architects   February 2004 - August 2005

Skills
Architecture, Construction Drawings, Facilities Management, Interior Architecture, Construction Management, Feasibility Studies, Architectures

Education
New York Institute of Technology   2001 — 2003
M ARCH, Urban Design

Experience
Jacobs Engineering   October 2008 - Present
Floresville Independent School District   2003 - 2015

Skills
Microsoft Office, Project Coordination, Microsoft Excel, Outlook, Project Planning, Project Management, Microsoft Word, Adobe Acrobat

Education
University of North Texas
Bachelor of Arts (B.A.), Communication and Media Studies

Navarro College
Associate's degree, General Studies

Experience
Bokum Tool Company   May 2013 - Present
College for Creative Studies  September 2011 - June 2012
Jacobs Engineering   August 2007 - May 2011
LaSalle Bank  April 2006 - September 2007
Coshocton County Chamber of Commerce   November 2000 - March 2006

Skills
Microsoft Office, SpecsIntact, PowerPoint, Outlook, Microsoft Excel, Budgets, Customer Service, Microsoft Word, FrontPage, Event Planning, Event Management, Corporate Events, Project Management, Project Planning, Social Media, Nonprofits, Management, Training, Community Outreach, Shipping Systems, UPS Shipping, Data Entry, Travel Arrangements, Online Travel, Engineering, Chambers of Commerce, Singing, Bookkeeping, Accounts Payable, Money Management

Education
Mount Vernon Nazarene University   1989 — 1990
Business/Accounting

Experience
Murray Company  June 2015 - Present
Jacobs Engineering   October 2011 - June 2015
Parsons/PFI   1993 - October 2011
Herzog-Hart  May 1991 - September 1993

Skills
Engineering, Piping, CAD, Construction, AutoCAD, Project Engineering, P&ID, Commissioning, Construction Management, Navisworks, Project Estimation, Plant Design, Project Planning, Process Engineering, GMP, Biotechnology, 3D, BIM, Modeling, Process Piping Design

Education
Wentworth Institute of Technology   1990 — 1991
Computer Aided Design

New England Institute of Technology   1988 — 1991
Associate, Architecture

Experience
Jacobs Engineering   January 2012 - Present

Skills
Primavera P6, Civil Engineering, Construction

Education
NJIT   2010 — 2012
Bachelor of Science (BS), Civil Engineering

Experience
RSP Architects  November 2014 - Present
Henneman Engineering, Inc.   December 2011 - November 2014
Jordan & Skala Engineers Inc.   February 2011 - November 2011
Jacobs Engineering   May 2007 - January 2011
W-T Engineering, Inc.   January 2006 - May 2007
RTM & Associates  July 2002 - January 2006
Syntific Corporation   October 2000 - July 2002
Al-Razi Company   October 1998 - June 2000

Skills
Senior Mechanical..., HVAC Design Engineer, MEP Design Engineer, Engineering, HVAC, LEED AP, MEP, Revit, MEP Design, CAD, LEED, Engineering Design, Energy Audits, AutoCAD, Construction Drawings, Construction, Electrical Engineering, Construction Management, Submittals, Project Management, Mechanical Engineering, Fire Protection, Plumbing, Energy Efficiency, Green Building, BIM, Building Services, Piping, Project Engineering

Education
NED University of Engineering and Technology   1992 — 1996
BSME, Mechanical

Experience
Jacobs Engineering   January 2000 - Present

Education
New Jersey Institute of Technology   1995 — 2000

Experience
Highway Tech   September 2012 - Present
G4S Technology  September 2011 - September 2012
Jacobs Engineering   November 2009 - September 2011

Education
New England Institute of Technology   1992 — 1996
Computer Engineering

Experience
Marathon Petroleum Corporation  January 2015 - Present
Phillips 66  May 2013 - January 2015
Sinclair Oil  February 2012 - April 2013
Jacobs  April 2011 - February 2012
Marathon Petroleum Company  September 2008 - June 2011
Jacobs Engineering   February 2006 - August 2008
U.S. Air Force   September 1995 - September 1999

Skills
P&ID, Refining, Aspen HYSYS, Process Engineering, Commissioning, Heat Exchangers, Process Design, Process Safety, Sizing, HTRI Software, Refinery, Pumps, Pro II, Piping, Chemical Engineering

Education
New Mexico State University   2002 — 2005
B.S, Chemical Engineering

New Mexico State University-Alamogordo

Experience
Intel Corporation  June 2013 - February 2015
National Grid  July 2012 - June 2013
Jacobs Engineering   August 2010 - January 2011
Integrated Design Group, Inc.   December 2009 - May 2010
National Grid  May 2009 - September 2009
Wentworth Institute of Technology  October 2008 - September 2009

Skills
Electrical Engineering, Power Systems, Engineering, AutoCAD, Electronics, Power Distribution, Renewable Energy, Pspice, Multisim, Generators, Circuit Analysis, Program Management, Power Engineering, Electricity, Electric Power, Microsoft Office, Testing, Management, Microsoft Excel, Project Management

Education
Polytechnic Institute of New York University   2011 — 2013
MSEE, Power and Energy Systems Engineering

Polytechnic Institute of New York University   2011 — 2012
Power Systems Management, New York State Registered Certificate

Wentworth Institute of Technology   2007 — 2011
BSEE, Electrical Engineering

Experience
Gluck+   May 2011 - Present
The Conti Group  November 2010 - July 2011
The Longo Partnership Architects   September 2010 - November 2010
GRO Architects   December 2008 - January 2009
Jacobs Engineering   2006 - 2009

Skills
Architectural Design, Sustainable Design, Rendering, Revit, Residential Homes, Submittals, Mixed-use, SketchUp, Design Research, Rhino, Photoshop, Android Development, Graphic Design, User Interface Design

Education
New Jersey Institute of Technology   2005 — 2010
B-ARCH, Architecture

Experience
Jacobs Engineering   April 2012 - Present
Burt's Bees  2004 - 2009
Advantage Conveyor, Inc.   2001 - 2004
Pronto Automation, Inc.   1996 - 2001
Dynamic Controls, Inc.   1993 - 1996
Mr. Part   1986 - 1993

Skills
Lean Manufacturing, AutoCAD, Automation, Continuous Improvement, Six Sigma, cGMP, Product Development, Manufacturing, Injection Molding, Engineering Management, Process Engineering, Project Management, Management, GMP

Education
North Carolina State University   1989 — 1996
Mechanical Engineering

North Carolina State University

Experience
Glory Meditec   November 2014 - Present
MEMSIC  December 2011 - October 2014
MEMSIC  May 2010 - December 2011
MEMSIC  May 2008 - May 2010
Jacobs Engineering   September 2006 - April 2008

Skills
Sensors, Semiconductors, MEMS, FPGA, Manufacturing, Program Management, Engineering, Electronics, Process Control, Wireless Sensor Networks, Digital Signal..., Electrical Engineering, Engineering Management, Project Management, Medical Instrumentation, Industrial Control, Optimization, Innovation Management

Education
University of Houston   2004 — 2006
Ph.D., Electrical Engineering

National University of Singapore   2001 — 2003
M.S., Electrical Engineering

Shanghai Jiao Tong University   1997 — 2001
B.S., Automation

Experience
Parsons Environment & Infrastructure   September 2015 - Present
Parsons International Limited  February 2013 - August 2015
LG2 Project Management, LLC   July 2009 - February 2013
Parsons Brinckerhoff  March 2008 - June 2009
Reddy & Reddy Architects AIA   May 2006 - June 2008
Heery International  November 2003 - May 2006
Jacobs Engineering   March 1985 - December 2002

Skills
Contract Negotiations, Budgeting, Government, Airports, Healthcare, Team Leadership, Higher Education, Corrections, Staff Management, Construction Management, Construction, Value Engineering, Contract Management, Project Planning, MS Project, Contract Negotiation, Facilities Management, Green Building, Planning, Sustainability, Project Coordination, Team Building, Supervisory Skills, Renovation, Coordination, Program Management, Pre-construction, Construction Documents, Claims Analysis, Project Administration, Design and..., Master Planning, Preparation of Bid..., Preparation of General..., Managing Complex GC and..., Compressed Schedules, Tight Budgets, Projects with Limited..., Forensic Architecture, Managing Multi-million..., Managing Multiple..., Prolog, Program Director, General Administration, Contractors, Responding to RFP's, Interview Strategy and..., Architectural..., Management Consulting, Business Owner M/WBE...

Education
New Jersey Institute of Technology   1980 — 1982
Bachelor of Architecture (BArch), Architecture

The Ohio State University   1978 — 1980
Architecture

William Paterson College of New Jersey   1972 — 1976
Chemistry

Experience
Jacobs Engineering  

Skills
Project Management, Engineering, Project Engineering, Management, Construction Management, MS Project, Project Control, Primavera P6, Contract Management, Project Planning, Process Improvement

Education
New Jersey Institute of Technology
Master's degree, Mechanical Engineering

Experience
Pepco Energy Services  December 2012 - Present
Pepco Energy Services  June 2010 - December 2012
Jacobs Engineering   2010 - 2010
DRAKE Incorporated   August 2008 - December 2009
BE&K Building Group  2005 - 2008
Bovis Lend Lease  May 2001 - October 2005
Johnson Controls  2000 - 2002
CBRE  2000 - 2000
Robertshaw Controls  1995 - 2000
Dynaelectric   1985 - 1987

Skills
Construction Management, Value Engineering, Construction, Commissioning, Submittals, Facilities Management, Electricians, Project Management, Contract Management, Energy, Subcontracting, Energy Management, HVAC, Project Estimation, Energy Efficiency, LEED, Primavera P6, CPM Scheduling, MS Project, Pre-construction, Project Engineering, Procurement, Project Planning, Inspection, Construction Safety, Process Scheduler, Project Bidding, Green Building, Change Orders, Energy Audits, LEED AP, Proposal Writing, Project Control, Design-Build, MEP, Energy Conservation, Cost Control, Power Generation, Constructability, Renewable Energy, Contract Negotiation, Engineering, Power Plants, Water, Solar Energy, Feasibility Studies, Building Automation, Gas, Microsoft Project

Education
National Louis University   2001 — 2004
Bachelors, Business Management

Northern Virginia Community College   2000 — 2001
Associate in Applied Science, Construction Management

Association of Energy Engineers   2014 — 2014
CMVP- Certified Measurement and Verification Professional

Association of Energy Engineers   2012 — 2012
CEM - Certified Enegry Manager

Assoication of Energy Engineers   2012 — 2012
DGCP - Distribution Generation Certified Professional

Association of Energy Engineers   2011 — 2011
CBCP - Certified Building Commissioning Professional

United States Corp of Engineers   2009 — 2009
Construction Quality Control Certification

Construction Specification Institute   2008 — 2008
CDT - Contract Document Technologist

United Green Building Council   2001 — 2001
LEED Accredited Professional

Experience
Jacobs Engineering   May 1997 - Present
Carter & Burgess  May 1997 - November 2007
Garver  October 1992 - January 1995

Skills
Problem Solving, Roadway Design, Drainage, Highways, Civil Engineering, Transportation, Construction, Road, Transportation Planning, Pavement Engineering, Program Management, Contract Management, Transportation..., Traffic Engineering, Engineering, Primavera P6, Stormwater Management, MS Project, Sewer, Structural Engineering, Microstation, Land Development, Grading, Traffic Signal Design, Site Development, Highway Design, Erosion Control, Geopak, Bridge, MicroStation

Education
Oklahoma State University   1990 — 1992
M.Sc, Civil Engineering

NED University of Engineering and Technology   1983 — 1988
B.E., Civil Engineering

Experience
Parsons  October 2011 - Present
NC DOT  2002 - October 2011
Jacobs Engineering   1999 - 2001

Skills
Bridge, AutoCAD, STAAD, Concrete, Steel Structures, Steel Design, Structural Analysis, Civil Engineering, Foundation Design, Microstation, MathCAD, Highways, Wood, Geotechnical Engineering, Transportation..., Road

Education
North Carolina State University   2001 — 2003
MCE, Structures

North Carolina State University   1994 — 1998
BsCE, Civil Engineering - Structures

Experience
QualTec Services LLC   November 2012 - Present
Jacobs Engineering   December 2008 - August 2011
Wyeth Biotech  March 2003 - November 2008
Getinge Inc   October 2001 - March 2003
STERIS Inc.   March 1991 - October 2001
BOC / Edwards Freeze Drying Systems   March 1982 - March 1991

Skills
Validation, GMP, Change Control, Troubleshooting, Technology Transfer, Lifesciences, FDA, Cross-functional Team..., Computer System..., Manufacturing, Pharmaceutics, GAMP, 21 CFR Part 11, Medical Devices, V&V, Engineering, Commissioning, Life Sciences

Education
Niagara University   1978 — 1980

NCCC
Service Engineering, Electrical Engineering

Experience
AMEC Environment & Infrastructure UK Limited  November 2013 - Present
PT&C  February 2013 - November 2013
Jacobs Engineering   August 2011 - January 2013
Jacobs Engineering   August 2008 - August 2011

Skills
Concrete, Steel Structures, Masonry, Microstation, Civil Engineering, Structural Analysis, STAAD, AutoCAD, Construction Management, Geotechnical Engineering, Engineering, CAD

Education
North Carolina State University   2006 — 2008
MCE, Structural Engineering

North Carolina Agricultural and Technical State University   2004 — 2006
BS, Civil Engineering

Experience
Automated Control Concepts, Inc.   February 2014 - Present
Automated Control Concepts, Inc.   February 2011 - January 2014
Automated Control Concepts  February 2009 - January 2011
Machinery Control Systems, Inc.   July 2005 - January 2009
Jacobs Engineering   November 2003 - August 2004

Skills
PLC, Motion Control, Software Development, SCADA, Process Automation, Allen Bradley, Process Control, Instrumentation, Automation, HMIs, DCS, Control Systems Design, Control Logic, Robotics, ControlNet, Manufacturing, Human Machine Interface, Engineering, DeviceNet, PLC Programming, Wonderware, Ladder Logic

Education
New Jersey Institute of Technology   2004 — 2006
MS, Electrical Engineering

Sardar Patel University   1999 — 2003
BE, Mechatronics

Experience
Jacobs Engineering   October 2006 - December 2007
District Energy St. Paul   2000 - 2004
Xcel Energy  1998 - 2000
Voyageur Asset Management  1986 - 1990
Voyageur Asset Management  1984 - 1988

Education
Normandale Community College   1996 — 1997

Bloomington Jefferson Highschool   1978 — 1982

Experience
AECOM  December 2012 - Present
Jacobs Engineering   October 2006 - December 2012
University of Cincinnati  March 2005 - October 2006

Skills
Traffic Engineering, VISSIM, Transportation..., Civil Engineering, Transportation Planning, ArcGIS, Highways, Road Traffic, Traffic Signal Design, Traffic Simulation, Pavement Engineering, Road Safety, GIS, Microstation, Road, Bridge, Highway Design, Synchro, Matlab, Traffic Analysis, HCS, AutoCAD, Engineering

Education
University of Cincinnati   2003 — 2006

National Institute of Technology Warangal   1999 — 2003
B Tech, Civil Engineering

L r G school

Ratna Junior College

Experience
Lend Lease  December 2011 - Present
Lend Lease  October 2010 - December 2011
Bovis Lend Lease LMB, Inc  December 2007 - October 2010
The Whiting-Turner Contracting Company  May 2006 - December 2007
Jacobs Engineering   January 2006 - May 2006

Skills
Construction Management, Construction, Value Engineering, LEED AP, Pre-construction, Contract Management, Contract Negotiation, Project Management, Change Management, Estimating, Construction Document..., Prolog, isqft, Constructability, Project Control, Renovation, Change Orders, Subcontracting, Energy Efficiency, Submittals, Cost Management, Project Planning, CPM Scheduling

Education
New York University   2008 — 2010
School of Continuing and Professional Studies

Villanova University   2001 — 2006
Bachelors, Civil & Environmental Engineering

Experience
Jacobs Engineering   Project ManagerJacobs Engineering @ Merck .2003 - Present
Foster Wheeler  1996 - 2003

Education
New Jersey Institute of Technology   1995 — 1999

Experience
Edward Jones  July 2002 - Present
Lincoln Investment Planning  September 1996 - May 2002
Jacobs Engineering   July 1991 - December 1996
Jet Propulsion Laboratory  June 1989 - July 1991
R. D. Lundberg & Associates   June 1987 - February 1989
General Dynamics  January 1987 - June 1987

Skills
Series 7, Series 63, Series 65, Investments, Life Insurance, Long-term Care, Disability Insurance

Education
New Mexico State University   1983 — 1986
BBA, Finance, Economics

Experience
Independent Consulting Services  February 2011 - Present
Brown and Caldwell  April 2009 - January 2011
Jacobs Engineering   June 2007 - April 2009
Jacobs Engineering   August 2006 - June 2007
Parsons  March 2004 - August 2006
Parsons  July 2000 - February 2004
Montgomery Watson Harza  March 1990 - November 1999
Montgomery Watson Harza  June 1985 - March 1990
MWH  March 1975 - June 1985
Envirotech Corporation  March 1972 - March 1975

Skills
Program Management, Project Management, Project Planning, Civil Engineering, Asset Management, Water Recycling, Water Resources, Environmental..., Condition Assessment, Recycled Water, Stormwater Management, Wastewater Treatment, Water Management, Municipalities, Construction Management, Water Supply, Drainage, Contract Management, Strategic Planning, Water Quality, Sustainability, Engineering, Construction

Education
University of California, San Diego   1994 — 1996
Certificate, Financial Management, 3.95

USGS Water Quality Training School   1972 — 1973
Certificate, Water Resources

New Mexico State University   1970 — 1971
MSCE, Water Resources/Civil Engineering, 3.96

New Mexico State University   1965 — 1969
BSCE, Civil Engineering

Experience
Jacobs  August 2013 - Present
Jacobs  April 2010 - September 2013
Jacobs Engineering   April 2009 - March 2010
McKim & Creed  November 2006 - February 2009
Rodgers Builders  September 2004 - October 2006

Skills
Primavera P6, Civil Engineering, AutoCAD, Construction Management, Materials, Project Estimation, Site Plans, Construction, Stormwater Management, Concrete, Process Scheduler, Project Engineering, Contract Management, Site Development, Water, Grading, Erosion Control, Engineering, Road, Sewer

Education
North Carolina State University   1998 — 2003
Bachelor of Science (BS), Environmental Engineering

Experience
Burns & McDonnell  April 2013 - Present
New Providence Volunteer Fire Department   2005 - Present
New Providence Zoning Board of Adjustments   2006 - December 2013
Hatch Mott MacDonald  January 2008 - April 2013
Hatch Mott MacDonald  January 2008 - April 2013
Jacobs Engineering   April 2007 - January 2008
Edwards and Kelcey  May 2000 - April 2007
General Devices  1997 - 1998

Skills
Electrical Engineering, Construction, Water, Project Engineering, Engineering, Construction Management, Integration, Diesel Generator Sets, Engineering Management, Project Management, Generators, Gas Generator Sets, PLC, Inspection, Electricians, Electrical, Revit, AutoCAD, Project Estimation, MS Project, Commissioning, Microstation, Proposal Writing, Civil Engineering, Rail, Contract Management, Bridge, Hydraulics, Highways, CAD, Motor Control Logic, DoD Facility...

Education
New Jersey Institute of Technology   1996 — 2001
BSEE, Electrical Engineering

Experience
Jacobs Engineering   August 1987 - Present
Intex Inc. / Colloids Inc   December 1985 - July 1987
American Cyanamid  December 1983 - August 1985

Skills
Paper Industry, Process Engineering, Engineering, Microsoft Office, Coatings, Product Development, Process Optimization, Chemical Engineering, Process Simulation, Process Control, Capital Projects, Project Engineering, Root Cause Analysis, Manufacturing

Education
North Carolina State University   1979 — 1983
BS, Pulp & Paper Science and Technology

Experience
Tesoro  June 2014 - Present
Mustang Engineering  June 2010 - July 2014
Jacobs Engineering   2005 - 2009

Skills
PDS, AutoPlant, CADWorx Plant, AutoCAD, MS Project, Microsoft Office, Bentley Microstation, Piping, Refinery, Petrochemical, P&ID, Energy, Engineering, Gas, Petroleum, EPC, Commissioning, Oil, Project Engineering

Education
National University   2011 — 2013
Master of Science (MSc), Engineering/Industrial Management

Experience
Hopkinsville Water Environment Authority   July 2012 - Present
Jacobs Engineering   April 2010 - August 2012
CH2M HILL  October 2009 - April 2010
B. L. Harbert, International   April 2009 - October 2009
City of Hopkinsville  April 2004 - April 2009
Granite Construction  May 2003 - April 2004

Skills
Construction Safety, Safety Management..., Inspection, Industrial Safety, Risk Assessment, Accident Investigation, Construction, Construction Management, Occupational Health, Behavior Based Safety

Education
Murray State University   1999 — 2003
Bachelor of Science, OSHA

Experience
Help4Haiti, Inc   March 2010 - Present
Chalmers Construction   August 2009 - Present
LAC Engineering   November 2008 - Present
Jacobs Engineering   March 2007 - November 2008
LAI Engineering  August 1998 - March 2007

Skills
Civil Engineering, Transportation..., Construction Management, Road, Traffic Engineering, Transportation Planning, Traffic Signal Design, Road Traffic, Municipalities, Parking, Transportation, Highways, Drainage, Land Development, Stormwater Management, Renovation, Concrete, Feasibility Studies, Expert Witness, Project Estimation, Construction, Value Engineering, Contract Management, Custom Remodeling, Engineering, Erosion Control, Process Scheduler, Proposal Writing, Site Development, Site Plans, Sustainability, Zoning

Education
NC State University   1970 — 1974
BS, Civil Engineering

North Carolina State University   1970 — 1974
BSCE, Civil Transportation Engineering

Experience
Chevron  November 2014 - Present
Jacobs Engineering   April 2014 - October 2014
Chevron  November 2013 - March 2014
BG Group  July 2012 - October 2013
Swift Technical   June 2008 - October 2013
QGC - A BG Group Business  July 2010 - July 2012
ConocoPhillips  June 2008 - July 2010
ConocoPhillips, Houston   June 2008 - July 2010
Suncor Energy  August 2007 - March 2008
KAP Project Services   July 2005 - August 2007

Skills
Refinery, Plant, Primavera, Primavera P6, Planning/Scheduling, P3, Scheduling, SAP, Factory, Process Scheduler, Energy, Project Control, LNG, CPM Scheduling, Supervisory Skills, EPC, Offshore Drilling, Petroleum, Project Engineering, Oil/Gas, Construction, Project Estimation, Pipelines, Procurement, Gas, Cost Engineering, Contract Management, Petrochemical, Engineering, MS Project, Piping, Energy Industry, Onshore, Project Planning, Commissioning, Cost Control, Upstream, FEED, Refineries, WBS, Downstream Oil & Gas, Oil & Gas Industry, Oil & Gas, Public-private..., Microsoft Project

Education
New Mexico State University

Experience
Jacobs  September 2012 - Present
Jacobs Engineering   February 2011 - September 2012
Jacobs Engineering   August 2010 - February 2011
Webcor Builders  January 2008 - July 2009
Parkfifth LLC   May 2007 - November 2007
Turner Construction  December 2004 - May 2007
Jacobs Engineering   September 1994 - November 2005

Skills
Construction, Construction Management, Manufacturing, Primavera P6, Project Estimation, Value Engineering, CPM Scheduling, Change Orders, MS Project, Project Engineering, Contract Management, Engineering, Subcontracting, Project Control, AutoCAD, Process Scheduler, Project Planning, Constructability, Project Management, Pre-construction

Education
New Mexico State University   1988 — 1992

Experience
Jacobs Engineering   April 2010 - March 2015
Gemini Integration Solutions   November 2009 - March 2010
Bantrel  1998 - 2009

Skills
Contract Management, Change Management, Cost Engineering, EPC, Cost Control, Project Management, Project Control, Energy Industry, Downstream Oil & Gas, Primavera P6, Petroleum, Refinery, FEED, Project Engineering, WBS

Education
National Tsing Hua University   1972 — 1976
B.Sc, Chemical Engineering

Experience
I am not working.  May 2012 - Present
Jacobs Engineering   November 2010 - April 2015
Jacobs  November 2010 - February 2015
AMEC  January 2010 - October 2010
Hatch  August 2008 - December 2009
Rapid Response Project Ltd.   July 2006 - August 2008

Skills
Piping, MicroStation, AutoCAD, PDS, Factory, Materials, Structural Engineering, Valves, Construction, EPC, Teamwork, Microstation

Education
Intergraph-Sait.   2012 — 2014
Autoplan V8i- Autocad 2010-2012, Process Piping and Drafting.

Mount Royal University   2011 — 2012
Certificate in Project Management

Intergraph-Sait.   2008 — 2011
PDS-Microstation V8., PDS-Autoplant.

Southern Alberta Institute of Technology   2005 — 2006
Process Piping and drafting, Process and Piping designer

Universidad Libre de Colombia   1992 — 1997
Industrial Engineer

Experience
TRC Companies, Inc.   January 2013 - Present
GC Wallace  March 2003 - January 2013
Parsons Brinckerhoff Quad & Douglas, Inc   November 2001 - March 2003
Jacobs Engineering   October 1997 - November 2001

Skills
Concrete, Project Management, Structural Engineering, Transportation..., Road, Highways, Foundation Design, Engineering, Drainage, Bridge

Education
Old Dominion University   1982 — 1985
Master's degree, Civil Engineering

North Carolina State University   1979 — 1981
Bachelor of Science (BS), Civil Engineering

Experience
KOCH MODULAR PROCESS SYSTEMS   June 2010 - Present
Jacobs Engineering   April 2008 - June 2009

Education
New Jersey Institute of Technology   1981 — 1983
Engineering

Experience
ARC Alternative and Renewable Construction   October 2015 - Present
Sanctuary for Families  March 2012 - Present
Internatio​nal Conference on Sustainabl​e Design, Engineerin​g and Constructi​on   June 2012 - Present
Cragsmoor Association   2009 - Present
McKissack & McKissack  February 2009 - July 2014
White Ridge Group   June 2009 - January 2010
Jacobs Engineering   May 2002 - January 2009
URS Corporation  1996 - May 2002

Skills
Sustainability, Construction, LEED, Green Building, LEED AP, Project Management, Submittals, Program Management, Construction Management, Contract Management, AutoCAD, Renovation, Sustainable Design, Project Planning, Strategic Planning, Architectural Design, Design Research, Revit, Value Engineering, Process Scheduler

Education
New York University   1988 — 1990
Master's degree

University of Utah   1984 — 1988
Bachelor of Applied Science (B.A.Sc.)

University of Utah   1984 — 1988
Bachelor of Arts (B.A.)

Experience
Heatcraft Worldwide Refrigeration  June 2014 - Present
Baltimore Aircoil Company  November 2011 - Present
Baltimore Aircoil Company  June 2010 - January 2012
Ingersoll Rand  2005 - August 2010
Carrier Commercial Refrigeration  2002 - 2005
Jacobs Engineering   June 1999 - February 2002
DLB ASSOCIATES  1997 - 1999
Cooperheat   1995 - 1995

Skills
HVAC, Engineering, Refrigeration, Mechanical Engineering, Air Conditioning, Energy Management, Manufacturing, HVAC Controls, Energy Efficiency, Energy Conservation, Product Development, Cooling Water, Project Management, Energy, Contract Management, AutoCAD, Sales Management, Ventilation, Construction Management, Engineering Management, Business Development, CAD, Electricians

Education
The University of Texas at Arlington   2000 — 2004
Master of Mechanical Engineering, Mechanical Engineering - Heat Transfer

New Jersey Institute of Technology   1996 — 1999
Bachelor of Science (BS), Mechanical Engineering

Rutgers, The State University of New Jersey-New Brunswick   1989 — 1996
Bachelor of Arts (B.A.), Mathematics

DTEA   1984 — 1987

Experience
CBRE  September 2015 - Present
Johnson Controls  April 2011 - September 2015
Jacobs Engineering   March 1996 - April 2011
BE&K Construction Co.   October 1990 - March 1996

Skills
Commissioning, Engineering

Education
North Carolina State University
BSME, Mechanical Engineering

University of North Carolina at Asheville
NCSU Engineering 2 + 2 Program

Experience
Jacobs  April 2014 - Present
Jacobs Engineering   January 2011 - April 2014

Skills
AutoCAD, HVAC, Building Services, Engineering, Energy Management, Project Management, Contract Management, Troubleshooting, Construction, Procurement, Program Management, Infrastructure, Facilities Management, Change Management, Project Coordination, MS Project, CAD, Project Estimation, Project Engineering, Microsoft Project

Education
North Carolina Agricultural and Technical State University   2006 — 2010
B.S. Architectural Engineering, Mechanical Systems Design

Experience
Jacobs Engineering   2005 - Present
CMAA  1995 - 2013
Jacobs Engineering   1999 - 2011
Heery International  1987 - 1991

Skills
Project Control, Primavera P6, Construction Management, Construction, Program Management, Earned Value Management, Value Engineering, Process Scheduler, Contract Management, Civil Engineering, Project Estimation, CPM Scheduling, Subcontracting, Change Orders, Cost Management, Submittals, Construction Safety, Constructability, LEED, Cost Control, Road, MS Project, Project Bidding, Procurement, Proposal Writing, Pre-construction, Facilities Management, Renovation, Feasibility Studies, Project Planning

Education
New York University   1981 — 1985
Master of Business Administration (MBA), Finance, General

University of Connecticut Storrs Connecticut   1974 — 1979
Bachelor of Science (BS), Civil Engineering

Experience
GHD  January 2014 - Present
Jacobs Engineering   July 2012 - January 2014
Jacobs Engineering   July 2002 - August 2012
Jacobs Engineering   June 2002 - July 2012
Jacobs  2002 - 2010
Ford, Bacon & Davis, LLC   1996 - 2002
ExxonMobil  1990 - 1992
ExxonMobil  1990 - 1992

Skills
IT Management, Project Management, Program Management, Change Management, SharePoint, Infrastructure, Integration, MS Project, IT Strategy, Project Delivery, Active Directory, Project Portfolio..., Disaster Recovery, Visio, PMP, Business Analysis, ITIL, Business Process..., Process Improvement, Bentley Microstation, AutoCAD, PDS, PDS Frameworks, Lotus Notes, Visual Basic, Unix Shell Scripting, Arc Welding, Woodworking, Smart Plant Review, Web Design, Web Development, Microsoft Office, Engineering, Primavera P6, EPC, Microsoft SQL Server, Home Automation, Home Audio, Surveillance Systems, Networking, Fiber Optic Networks, Downstream Oil & Gas, Communication Skills, Petrochemical, Project Control, Navisworks, Project Engineering, Document Management, Earned Value Management, Nuclear

Education
Ascension Technical College
Industrial Electronics Technology/Technician

Ascension Technical College
CAD/CADD Drafting and/or Design Technology/Technician

Nicholls State University
Accounting

Experience
Jacobs Technology  March 2012 - Present
Jacobs Engineering   January 2011 - March 2012
Instrumentation Engineering  January 2009 - June 2009

Education
New Jersey Institute of Technology   2004 — 2009
BS, Mechanical Engineering

Experience
Jacobs Engineering   July 2011 - Present
Insulating Services, Inc.   June 2006 - July 2011

Skills
Procurement, Cost Management, Project Estimation, Piping, Civil Engineering, Process Scheduler, Project Engineering, Primavera P6, Project Control, EPC, Engineering Design

Education
North Carolina Agricultural and Technical State University   2008 — 2011
Bachelor of Science (BS), Civil Engineering, 3.78

Experience
Mustang Engineering  August 2011 - Present
Edwards Industrial Instrument International, LLC   October 2003 - August 2011
Fluor  September 2001 - September 2003
Wunderlich-Malec Engineering  February 2000 - May 2001
Honeywell Process Solutions  February 1999 - September 1999
Stewart & Stevenson  September 1998 - November 1998
Fluor  May 1996 - May 1998
Jacobs Engineering   April 1995 - April 1996
Fluor  November 1994 - April 1995
American Process Design   October 1994 - November 1994

Skills
Instrumentation, Control Systems Design, P&ID, Engineering, Project Engineering, EPC, Commissioning, Refinery, Petrochemical, Petroleum, Energy, PLC, Oil/Gas, DCS, Electrical Engineering, Process Control, SCADA, Electricians, Process Simulation, Testing, FEED

Education
New Jersey Institute of Technology   1975 — 1979
BS, Electrical Engineering

Experience
Jacobs Engineering   November 2007 - Present
Carter & Burgess  September 1995 - November 2007
Urban Transportation Engineers, Inc.   August 1994 - July 1995

Skills
Transportation...

Education
New Mexico State University
Bachelor of Science, Civil Engineering

Experience
Jacobs Engineering   June 2011 - Present

Skills
Process Engineering, Petrochemical, Project Management, Project Planning, Power Generation, Natural Gas, Promax, P&ID, Engineering Design

Education
North Carolina State University   2005 — 2009
Bachelor's degree, Mechanical Engineering

Experience
Sandia National Laboratories  June 2001 - Present
University of New Mexico  1997 - 2004
The IT Group  1995 - 2001
Jacobs Engineering   1988 - 1995
Kirtland AFB  1987 - 1988

Skills
Systems Engineering, System of Systems..., Project Management, Risk Management

Education
Stevens Institute of Technology
Masters of Engineering (ME), Systems Engineering

New Mexico State University   1995 — 1997
Master of Science (MS), Industrial Engineering

The University of New Mexico   1980 — 1990
Master of Business Administration (MBA), Bachelors of Business Administration, Associates of Engr, Finance, Human Resource Management, General Management, Mechanical Engineering, Civil Engineering